Book, change, or ask about an install — chat here:
Water Heater Cleaning and Repair
One flat price — $149 — covers either cleaning, done on site, no hourly meter. Tank water heater: a full flush that drains the sediment out of the bottom of the tank. Tankless water heater: a full descale that dissolves the scale buildup inside the heat exchanger. Every cleaning includes a full check of the heater — and if yours isn't working (no hot water, a leaking tank, a pilot that won't stay lit), any repair is quoted flat for your approval before work starts.
Flat price for one water heater — a full tank flush with sediment removal, or a full tankless descale, plus a full check of the heater. Done on site.
Cleaning price · about 1.5 hrs · $0 due today
Installed by Jay himself — he's been installing water heaters since 2013, and he's the one who shows up.One installer, Mon–Sat — when a day fills, it's gone.
or call/text (323) 432-0008

Tankless water heater descaling
Every time a tankless water heater fires, the minerals in your water — mostly calcium and magnesium — bake onto the inside of the heat exchanger as hard scale buildup. That scale insulates the exchanger, so the unit burns more gas to make the same hot water, runs hotter than it should, and wears out faster. Tankless water heater descaling circulates a descaling solution through the unit to dissolve the buildup, then flushes it clean — restoring flow, temperature, and efficiency. If you are searching for how to descale a tankless water heater and would rather hand it off, this is that service, done for you.
How often to descale a tankless water heater: about once a year is the standard recommendation from tankless manufacturers — more often if your water is hard. Many tankless warranties expect regular descaling as part of normal maintenance, so skipping it puts both the unit and its coverage at risk.
Signs your tankless needs a descale
- Hot water temperature swings hot and cold in the shower
- The unit shuts down or shows error codes
- Hot water flow is weaker than it used to be
- Rumbling, popping, or kettling noises from the unit
- It has been a year or more since the last service
Tank water heater flush cleaning
A tank water heater collects sediment — sand, grit, and mineral particles from the water supply — at the bottom of the tank. That sediment layer sits between the burner and the water, so the heater runs longer, burns more gas, and recovers more slowly. It is also what makes an older tank rumble and pop (kettling), as steam bubbles force their way up through the sediment — and left long enough, it shortens the life of the tank itself.
How often to flush a water heater: about once a year. To flush a water heater, we shut the unit down, drain the tank, and flush it with fresh water until it runs clear and the sediment is out — then refill, relight, and check the operation. It is the cheapest year of life you can buy for a tank.
Water heater repair
Cleaning fixes a dirty heater — but sometimes a water heater is not working because a part has failed. If you are looking for water heater repair or tankless water heater repair, the problem usually shows up as one of these:
- No hot water at all — or not enough hot water, showers that run lukewarm
- A water heater leaking — water pooling around the tank, or a drip from the temperature-and-pressure relief valve
- A rumbling water heater — popping and banging from the tank every time it fires
- A pilot light that won't stay lit, or ignition failures on a tankless unit
- Tankless error codes on the display, and hot water temperatures that swing hot and cold
The common repairs are the thermocouple and pilot assembly, the gas control valve, the temperature-and-pressure relief valve, the anode rod, and the drain valve on a tank heater — and igniter and flame sensor service on a tankless water heater. Often, the repair is the descale itself: scale buildup sits behind a lot of tankless flow and temperature error codes, and the cleaning clears it.
How repair pricing works: the $149 visit you book is the cleaning — the full flush or descale — and it includes a full check of the heater while we are there. If a repair is needed, it is quoted as one flat price on site before any repair work starts. Parts are separate from the $149. You approve the quote first — or the visit simply stays $149 for the cleaning and the check. No hourly meter, no surprises.
What's not included
The price covers
- Cleaning labor for one water heater
- Tank heaters: full drain, flush, and sediment clean-out until the water runs clear
- Tankless heaters: full descale of the heat exchanger, flushed clean
- Refill, restart, and full operation check
- Leak check on every connection we touched
- A full check of the heater — ignition, valves, and operation — so you know its condition
On you
- Repair parts are separate from the $149 — a thermocouple, gas control valve, relief valve, anode rod, or drain valve is not included in the cleaning price
- Every repair is quoted as one flat price on site, before any repair work starts; nothing is replaced without your approval
- A second heater cleaned on the same visit is a second $149 cleaning
Tankless Trooper is a non-licensed labor service — cleaning and maintenance work is performed on site, under the property owner's direction.
How it works
Book your slot online
Pick a time that suits you. Nothing to pay, nothing to sign — tell us in the booking notes whether your heater is tank or tankless.
We clean and check your heater
A full flush for a tank, or a full descale for a tankless — plus a full check of the heater, about 1.5 hours on site. If a repair is needed, you get the flat quote before any work starts.
Pay when the cleaning and check are done
The cleaning is $149. Any repair you approved is charged at the flat quote agreed before work starts.
You pay nothing until your water heater is cleaned and the hot water is running.
That's the whole guarantee. Fixed price in writing before we start, and we don't offer financing — you pay on completion.
Book Cleaning + Heater Check — $149Questions
How often should you flush a water heater?
About once a year. A yearly water heater flush keeps sediment from building up on the bottom of the tank, where it slows heating, wastes gas, causes rumbling and popping, and shortens the life of the tank.
How often should you descale a tankless water heater?
About once a year — more often if your water is hard. Descaling a tankless water heater is the maintenance its manufacturers recommend on that schedule, and many tankless warranties expect it to be done regularly.
What are the signs my tankless water heater needs descaling?
Temperature swings in the shower, error codes or shutdowns, weaker hot water flow, and rumbling or popping noises are the classic signs of scale buildup in the heat exchanger.
What happens if you never flush a tank water heater?
Sediment keeps collecting until the tank rumbles and pops every time it fires, heats slower, burns more gas, and corrodes from the inside — and the drain valve can clog solid, making the tank impossible to drain at all.
Does the $149 cover both a flush and a descale?
The $149 covers one water heater — a full flush for a tank unit or a full descale for a tankless unit, at the same flat price. A second heater is a second cleaning.
What if you find a failed part during the cleaning?
The cleaning stays $149. If we find a part that has already failed — a thermocouple, a drain valve, an anode rod — that repair is quoted as one flat price on site, parts separate from the cleaning, and only done with your approval.
How much does water heater repair cost?
There is no hourly guessing here. You book the $149 visit — the cleaning (a full flush or a full descale) plus a full check of the heater. If a repair is needed, you get one flat quote on site before any repair work starts. Approve it and the repair goes ahead; decline it and you still have the cleaning and a checked heater for $149.
Should I repair or replace my water heater?
As a rule of thumb: a tank water heater under about eight years old, with a tank that is not leaking, is usually worth repairing. Past ten to twelve years — or any time the tank itself is leaking — replacement usually makes more sense, because a leaking tank cannot be repaired. Tankless water heaters run longer, so a repair or a descale is often the right call there. After the check we will tell you honestly which way your heater leans.
Can a repair be done on the same visit?
Often, yes. The common water heater repairs — a thermocouple or pilot assembly, a temperature-and-pressure relief valve, a drain valve, igniter and flame sensor service on a tankless unit — are typically finished on the same visit when the part is on hand. If a part has to be ordered, you already have the flat quote, and the repair is scheduled with the price fixed.